Hampton Bay 16665-016 Guia de Instalação

Consulte online ou descarregue Guia de Instalação para não Hampton Bay 16665-016. Hampton Bay 16665-016 Installation Guide Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 2
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 0
• Please read all instructions prior to installation.
• Installation of this fixture must comply with local building codes.
• Installation of this fixture must be done by a qualified electrician.
Veuillez lire toutes les instructions avant lʼinstallation.
Lʼinstallation de ce luminaire doit être faite selon le code local
de construction.
Lʼinstallation de ce luminaire doit être faite par un électricien qualifié.
• Favor de leer toda las instrucciones antes de comenzar la instalacion.
• La instalacion de esta luminaria (este producto) debera de cumplir con los
codigos locales de construccion.
• La instalacion de esta luminaria (este producto) debera ser realizada por un
electricista calificado.
16665
INSTRUCTIONS
Thank You
Youʼve just
purchased a
lighting product
designed and built
to provide you
with many years of
enjoyment.
Merci
Vous venez
dʼacheter un
luminaire conçu pour
vous donner
des années de plaisir.
Gracias
Usted acaba de
adquirir un excelente
producto de alumbrado
disenado y construido
para proveerle muchos
años de satisfaccion.
16665/01/2009
INSTALLATION & CONNECTIONS
TURN ON POWER
ENJOY YOUR HAMPTON BAY™ LIGHTING PRODUCT
Tools Required • Outils Nécessaires • Herramientas Requeridas
INSTALLATION INSTRUCTION
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
IMPORTANT: Use a qualified electrician for installation of this lighting fixture.
INSTALLATION INSTRUCTION
1. Turn off power at main fuse box.
2. Tighten center pieces (H) and (I) onto frame.
3. Install crossbar assembly complete with nipple and canopy chain loop to
junction box as one complete assembly.
4. Remove loop ring (B) from canopy loop (C). Slip canopy (D) over loop (C) and
secure by fastening loop ring (B). Adjust the height of the nipple so canopy will
sit flat against ceiling and tighten locknut (A) against crossbar (E).
5. Remove loop ring (B) and canopy (D) from ceiling.
6. Assemble chandelier as per photo but do not weave wire through chain links
yet.
7. Hold chandelier up against canopy loop (C) with chain and adjust to desired
height. Remove excess chain.
8. Before tightening chain onto canopy loop (C), weave chandelier wire through
every second link.
9. Let the canopy loop ring (B) slip to the bottom of chain. Repeat this step for
canopy (D).
10. Secure chain onto canopy loop (C).
11. Weave wire through the canopy loop and into junction box.
12. Connect both ground wires together one from the canopy (F) and one from the
fixture (G), and then connect them to ground wire of junction box (using wire
connectors included).
13. Connect black wire of power supply to the smooth side of the wire (flexible
cord) from the chandelier and connect white wire of power supply to the
ribbed side of the wire from the chandelier. NOTE: Always use wire
connectors or marrettes (included) to connect wires and push all excess wire
and connections back into junction box.
14. Lift canopy up to ceiling covering junction box and secure by using canopy
loop ring.
CAPIZ SHELL STRAND & BULB INSTALLATION
1. Install 100W max A19 bulb (NOT INCLUDED).
2. Carefully unwrap one package of Capiz shell at a time.
3. Install longer capiz shell strands onto the inner frame (22 pcs), and shorter
strands onto the outer frame (40 pcs).
Vista de página 0
1 2

Resumo do Conteúdo

Página 1 - Thank You

• Please read all instructions prior to installation.• Installation of this fixture must comply with local building codes.• Installation of this

Página 2 - ENCIDENDA LA LUZ

8P CS*4 0bu nch10PCS* 22b unc hIHAFEGDCBINSTALLATION ET CONNEXIONSIN S TAL A C IÓN Y CON E XIÓNESREMETTEZ LE COURANT PRENEZ PLAISIR AVEC VOTREPRODUIT

Comentários a estes Manuais

Sem comentários