Hampton Bay 05930 Guia de Instalação descarregar pdf (Página 6)

Page 6

PARTS INCLUDED FOR INSTALLATION (parts are not to scale):

INSTALLATION INSTRUCTIONS:

1. Attach the Circular Strap (#10) using Outlet Box Screws (#9) to the Outlet Box. The

side of the Circular Strap marked “GND” must face out.

2. Thread the two Mounting Screws (#7) part way into Circular Strap (#10).

3. Connect the white wire from the fixture to the white wire from the Outlet Box (#6),

and the black wire from the fixture to the black wire from the Outlet Box (#6). Cover

the two wire connections using the two provided Wire Connectors (#11). Wrap the

two wire connections with electrical tape for a more secure connection. If your outlet

box has a ground wire (green or bare copper), connect fixture’s ground wire to it

using the wire connector (#11). Otherwise connect the copper ground from the

fixture to Ground screw (#8) on the Circular Strap (#10). Note: If you have electrical

questions, consult your local electrical code for approved grounding methods.

4. Mount the body of the fixture on the wall by aligning the protruding Mounting

Screws (#7) all the way through the holes on the Fixture Body (#1). Be careful not to

pinch any of the wires between the fixture and the Outlet Box (#6). Tighten the

fixture to the wall by screwing the two Knurled Knobs (#2) onto the two protruding

Mounting Screws (#7).

5. Install the proper light bulbs (not included) for your fixture. (DO NOT EXCEED

THE SPECIFIED WATTAGE!)

6. Installation is complete. Turn on the power at the circuit breaker or fuse box. Turn

the light switch on to activate the fixture.

3 Wire Connector(#11)

2 Outlet Box Screws(#9)

2 Knurled Knob (#2)

2 Mounting Screw (#7)

1 Ground Screw(#8)

1 Circular Strap(#10)

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Sem comentários

Hampton Bay 05930 Guia de Instalação Página 6